Electric Scooter Parts

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Ｎote:　Controller A is for the front-wheel motor. Only one controller is sent, not two.

Please include the electric scooter's serial number in the order notes so the product batch can be verified. Failure to provide the serial number will result in a shipping delay. The serial number is located as shown in the image below:

SUNNIGOO X10 Controller Ａ (the front-wheel motor) delivers precise speed regulation and reliable performance for your electric vehicle applications. Engineered with advanced circuitry for optimal torque management and efficient power distribution, this controller ensures smooth acceleration and consistent operation. Compatible with multiple motor configurations while providing essential protection against overheating and voltage fluctuations.

Disclaimer: The accessories sold by this store are exclusively compatible with SUNNIGOO branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

This is the original main cable harness for the SUNNIGOO N3MAX and N3LMAX electric scooters with seat. It is the single loom that carries power and signal between the battery tray, the controller, the dashboard, the brake cut-off switches and the lighting circuit. When a scooter dies completely, flickers on bumps or shows an error code that no reset clears, a chafed or corroded main cable is one of the first things a workshop checks — and on the N3 platform it is also one of the cheapest parts to replace.

What the main cable does on the N3 platform

The harness runs from the battery compartment, through the folding stem joint, up to the dashboard connector block, with branches for the front and rear brake sensors and the lighting loom. It is sheathed in a flexible PVC jacket with moulded connectors at both ends, so the install is plug-and-play: no soldering, no pin crimping, no need to open the controller housing beyond its cover screws.

Symptoms that point to a failed main cable

Replace the harness when you see one or more of these: the dash goes dark or reboots when you ride over kerbs; the throttle cuts in and out while the battery still shows a healthy charge; error codes appear and disappear when you wiggle the stem; the headlight and tail light stop together while the motor still runs; or the connector block at the stem shows a brown, heat-marked pin. Water ingress at the stem joint is the usual cause on scooters that are parked outside, because the fold joint is exactly where the loom flexes every ride.

Compatible models

How to confirm the right part before ordering

Send us the batch number stamped under the footrest or on the side panel, plus one photo of the connector block at the base of the stem. We check it against the production records and confirm fitment before dispatch, so you do not pay return shipping on a part that will not plug in. Orders without a batch number may be held until we can verify compatibility.

Fitting notes

Switch the scooter off and disconnect the battery before you start; the controller holds residual charge for a few minutes. Remove the deck cover and the four stem-cover screws, unclip the old harness from its retaining guides, and pull it through the fold joint slowly — do not yank, because the guide clips break easily. Route the new loom along the same path, seat every connector until it clicks, and check that the jacket is not pinched when the stem folds. Allow 60–90 minutes for a first install, and test throttle, brakes and lights on a stand before you ride.

Related parts for the N3 platform

• SUNNIGOO N3MAX 800W electric scooter with seat
• SUNNIGOO N3LMAX 800W off-road electric scooter
• N3MAX motor  ·  N3LMAX motor
• N3MAX 48V 13Ah battery  ·  N3LMAX 48V 15Ah battery
• N3LMAX accelerator  ·  N3MAX / N3LMAX rear fender

Not sure whether the fault is the cable or the controller? Write to service@sunnigoo.com with your batch number, a short video of the symptom and any error code — we reply within one working day. Spare parts ship from our EU warehouse in 3–5 working days.

Compatible Models

This charger is designed exclusively for the SUNNIGOO N7PRO 350W foldable electric scooter. If you need a charger for a different model, check the battery voltage and connector before ordering, or contact our support team at service@sunnigoo.com.

Note: Please include the electric scooter's serial number in the order notes so the product batch can be verified. Failure to provide the serial number will result in a shipping delay. The serial number is located as shown in the image below:

Disclaimer: The accessories sold by this store are exclusively compatible with SUNNIGOO branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Input: AC 100–240 V ~ 50/60 Hz
Output: DC 42 V 1.5 A

Keep your SUNNIGOO N7PRO ready for every ride with this replacement 42V 1.5A charger. It restores the 36V 10.4Ah lithium battery safely through the built-in BMS, so your scooter is charged overnight and ready for the morning commute. A spare charger at the office or in a second location means you never have to carry one back and forth.

Need the scooter this charger powers? See the SUNNIGOO N7PRO →

SUNNIGOO · Ride Anywhere, Live Happier — questions? Reach us at service@sunnigoo.com.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Note: Controller B controls the rear-wheel motor. Only one controller arrived, not two. Please include the electric scooter's serial number in the order notes so the product batch can be verified. Failure to provide the serial number will result in a shipping delay. The serial number is located as shown in the image below:

SUNNIGOO X7PRO/X7/X10 controller B (the rear-wheel motor) delivers precise speed regulation and reliable performance for your electric vehicle applications. Engineered with advanced circuitry for optimal torque management and efficient power distribution, this controller ensures smooth acceleration and consistent operation. Compatible with multiple motor configurations while providing essential protection against overheating and voltage fluctuations.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

The SUNNIGOO X7 combines precision voltage measurement with enhanced security features. This digital voltmeter incorporates an integrated key lock system, preventing unauthorized access and tampering. Engineered for consistent accuracy across multiple applications, it delivers reliable voltage readings while maintaining operational integrity through its secure locking mechanism. Ideal for professional electrical work requiring both measurement precision and access control.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Compatible Models

This controller is designed for the SUNNIGOO N7PRO electric scooter. It is the original replacement controller for the N7PRO 350W EU road-legal model. For the complete N7PRO scooter, visit the N7PRO product page.

Note: Please include the electric scooter's serial number in the order notes so the product batch can be verified. Failure to provide the serial number will result in a shipping delay. The serial number is located as shown in the image below:

Compatible Models: This motor is designed for the SUNNIGOO X7, SUNNIGOO X7PRO and SUNNIGOO X10 electric scooters. If you own one of these models and need a replacement hub motor, this is the correct fit. For other SUNNIGOO models, check the model-specific motor listing in our store.

What this motor replaces

This SUNNIGOO hub motor is built as a direct replacement for the rear drive motor used on the X7, X7PRO and X10 platforms. It restores the original acceleration, hill-climbing torque and top-speed behaviour you expect from a dual-motor or single-motor configuration. Each unit is tested for consistent power delivery and quiet operation before shipping.

Key points before ordering

• Verify your scooter model matches X7, X7PRO or X10 before purchase.
• The motor is intended as a like-for-like replacement; performance depends on the controller and battery pairing already on your scooter.
• Installation should be carried out by a competent technician using standard e-scooter tools.

Disclaimer: The accessories sold by this store are exclusively compatible with SUNNIGOO branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

SUNNIGOO · Ride Anywhere, Live Happier — questions before you order? Reach us at service@sunnigoo.com.