Electric Scooter Parts

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

The SUNNIGOO brake disc is the replacement rotor used across the X7, X7PRO, N3MAX, N3LMAX and X10 electric scooters — one pre-drilled steel disc that drops onto the original hub without adapters, spacers or machining. It is the part that decides how much braking force actually reaches the tyre: a warped or glazed rotor turns a perfectly good caliper into a lever that vibrates and fades. Ships from our EU warehouse · 3-5 working days.

What you get

One brake disc, drilled to the factory bolt pattern so it mounts on the original hub. Fixing bolts are not included: reuse the hardware already on your scooter unless a bolt head is rounded or the thread is corroded, in which case order a replacement set before you start. The disc is packed flat in a rigid sleeve — steel rotors bend in transit far more often than they wear out on the road, so keep it in the sleeve until the moment you fit it.

How do you know the disc needs replacing?

Brake discs rarely fail suddenly; they announce themselves. Replace the rotor when you notice any of the following:

• Pulsing through the lever or the deck under braking — the classic signature of a warped rotor, usually after a long descent with the brake dragged.
• Squeal that survives new pads — glazed or contaminated disc face that no amount of bedding-in will clean up.
• Deep scoring or grooves you can feel with a fingernail; grit trapped between pad and disc grinds the surface away.
• Blue or purple tint on the braking band — the steel has been overheated and its friction behaviour is no longer predictable.
• Visible run-out when you spin the wheel with the scooter on a stand — the disc edge wobbles relative to the caliper body.

If the pads are also worn past their friction material, replace both at the same time. A new disc running against worn pads will glaze within a few hundred kilometres.

Compatible models

Because the 10-inch and 11-inch versions are not interchangeable, add your wheel size to the order note when you check out. If your scooter has been converted to an aftermarket caliper or a larger rotor, send a photo of the hub before ordering and we will confirm the fit first.

Fitting notes

Put the scooter on a stand so the wheel turns freely, then remove the wheel or work in place depending on caliper clearance. Clean the new rotor with brake cleaner and a lint-free cloth before it goes near the pads — the protective oil film that stops rust in storage is exactly what you do not want on a friction surface. Tighten the fixing bolts evenly in a cross pattern rather than in a circle; a disc that is pulled down on one side will run out even if it was perfectly flat on the bench. Spin the wheel afterwards and check the gap between disc and pads is even on both sides.

Bedding in and routine checks

For the first 50–100 km, brake progressively from moderate speed rather than holding the lever down a long descent. This transfers an even layer of pad material onto the new steel and is what gives you consistent bite in the rain. After that, check bolt tightness at 500 km and again at the start of every season, and look at the disc whenever you change a tyre. A rotor is a wear part: it is cheaper than the caliper, the tyre and the hospital visit it protects.

Related SUNNIGOO parts and models

• SUNNIGOO X7 dual-motor e-scooter — 45-60 km range, 10-inch wheels
• SUNNIGOO X7PRO off-road e-scooter — 3600W peak, 10-inch off-road tyres
• SUNNIGOO N3MAX e-scooter with seat — 800W, 35-45 km range
• SUNNIGOO N3LMAX e-scooter with seat — 800W, 40-50 km range
• SUNNIGOO X10 off-road e-scooter — dual motor, 60V 38Ah, 11-inch wheels
• X7 / X7PRO / X10 front and rear fender set
• X7 / X7PRO / X10 rear turn signal

Not sure which rotor your batch uses? Send the serial number stamped under the footrest together with a photo of the caliper to service@sunnigoo.com — we answer within one working day. Every order ships from our EU warehouse with delivery in 3-5 working days and a 12-month warranty against manufacturing defects.

Compatible Models

This Controller A is designed for the SUNNIGOO X7PRO dual-motor off-road electric scooter, specifically driving the front-wheel motor. If you own an X7PRO, confirm you need the front-motor controller before ordering. View the full scooter here: SUNNIGOO X7PRO →

Note: You will receive only 1 controller, not 2.

Product Description

SUNNIGOO X7PRO Controller A (front-wheel motor) delivers precise speed regulation and reliable performance. Engineered with advanced circuitry for optimal torque management and efficient power distribution, this controller ensures smooth acceleration and consistent operation. It provides essential protection against overheating and voltage fluctuations.

Disclaimer: This accessory is exclusively compatible with SUNNIGOO branded scooters. Use with non-certified models may pose safety hazards and void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Spare part — model specific. Check your wheel size and scooter model against the compatibility table before ordering.

The SUNNIGOO 10-inch off-road replacement tire is the direct-fit tire and inner tube for the N3MAX and N3LMAX electric scooters. The tire uses a knobbly all-terrain tread — deeper shoulder lugs than the road pattern — so it holds a line on gravel, packed dirt and wet cobbles while still rolling quietly enough for daily city use. Four variants cover both models, outer tire or inner tube, from stock in our European warehouse.

What you get

One 10-inch off-road tire, or one matching inner tube, depending on the variant you select. The tread is moulded in a durable rubber compound with reinforced sidewalls, so it holds pressure over long periods and resists pinching on kerbs and potholes. Every unit is inspected before dispatch and ships from our EU warehouse in 3-5 working days.

Outer tire or inner tube — which one do I need?

If the rubber is worn but the wheel still holds air, you need the outer tire. If the tread is fine but the wheel goes soft within a day or two, the inner tube is punctured and that is the part to order. Because a tire change already means removing the wheel, most riders order both and keep a spare tube at home — a puncture on a 10-inch wheel is a ten-minute job with two tyre levers, and having the part on the shelf beats waiting for a delivery.

Specifications

Compatibility

Not sure? Read the marking moulded on your current tire sidewall and compare it with the specification above, or send a photo of the wheel to service@sunnigoo.com before ordering.

Signs the tire needs replacing

Four symptoms mean it is time: the tread blocks have flattened to the wear indicators in the centre; you can see cords or cracks in the sidewall; the scooter starts to wander on wet asphalt where it used to track straight; or the wheel loses pressure overnight even with a sound valve. Riding a worn 10-inch off-road tire is not just a comfort issue — braking distance on wet ground grows quickly once the shoulder lugs are gone, and the N3MAX carries up to 120 kg.

Fitting notes

Deflate fully before you start, break the bead on both sides, and use two tyre levers rather than a screwdriver — a metal blade will score the rim and create a slow leak. Fit the inner tube with a light dusting of talc, seat the bead evenly by inflating to half pressure first, then inflate to the pressure printed on the sidewall. Spin the wheel before refitting the brake caliper to confirm it runs true, and re-check spoke and axle torque after the first 10 km.

See also

• SUNNIGOO N3MAX — 800 W folding scooter with seat, 10-inch off-road wheels
• SUNNIGOO N3LMAX — the long-range 48V 15Ah version on the same platform
• N3MAX replacement motor — if the wheel spins but the scooter has lost power
• N3MAX / N3LMAX controller — error codes, no-start and throttle faults
• N3LMAX 48V 15Ah battery — range has dropped below half of new
• Best electric scooters in Europe 2026 — buying guide

Disclaimer: The accessories sold by this store are exclusively compatible with SUNNIGOO branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Engineered specifically for SUNNIGOO X7PRO, X7 and X10 models, this front and rear fender provides essential protection against road debris, water splashes, and mud. Constructed with durability in mind, it maintains the sleek aesthetic of your scooter while extending component longevity through reduced exposure to environmental elements.

The SUNNIGOO X7PRO main cable is the genuine replacement wiring harness for the X7PRO dual-motor electric scooter — the central connection between the battery, controllers, motor and display. If your X7PRO shows intermittent power loss, a blank display or unresponsive controls after long-term use, a worn main cable is one of the most common causes, and replacing it restores reliable performance in minutes with basic tools.

Why choose a genuine SUNNIGOO main cable?

• Factory-matched connectors — plug-and-play fit for the SUNNIGOO X7PRO, no wire cutting or splicing required.
• Insulated, high-current wiring built for the X7PRO's dual 1200W motor system and 48V platform.
• EU stock — ships from our European warehouse in 3–5 working days, tax included, with EU-based after-sales support.

Compatible Models

This main cable is designed for the SUNNIGOO X7PRO electric scooter (3600W dual motor, 48V 21Ah, 45–60 km range). Complete your X7PRO maintenance kit with genuine parts: shock absorbers & springs, the X7PRO controller and the 48V 21Ah lithium battery.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Note: The digital instrument cluster and the NFC card are sold separately; therefore, the digital instrument cluster does not come with an NFC card.

Introducing the Sunnigoo LCD Digital Meter, a sleek and sophisticated addition to your electronic tool collection. With its vibrant LCD display, this meter provides accurate and easy-to-read measurements for all your needs. Upgrade to a more refined and efficient experience with Sunnigoo.

Compatible Models

This LCD digital meter is a genuine SUNNIGOO spare part designed for the following models:

• SUNNIGOO X7PRO — 3600W dual-motor off-road electric scooter
• SUNNIGOO X10 — 6000W-peak dual-motor off-road electric scooter

It displays speed, battery level, assist mode and trip mileage in real time, and plugs into the original harness — no rewiring required. Looking for other spare parts? Batteries, chargers, controllers, tires and brake components for the X7PRO and X10 are all stocked in our EU warehouse and ship in 3–5 working days.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

The SUNNIGOO N3MAX combines precision voltage measurement with enhanced security features. This digital voltmeter incorporates an integrated key lock system, preventing unauthorized access and tampering. Engineered for consistent accuracy across multiple applications, it delivers reliable voltage readings while maintaining operational integrity through its secure locking mechanism. Ideal for professional electrical work requiring both measurement precision and access control.

Compatible Models

This 48V 13Ah lithium battery is the official replacement battery for the SUNNIGOO N3MAX 800W Electric Scooter. It is not compatible with the N3LMAX, N7PRO, X7 or other SUNNIGOO models due to different voltage and housing dimensions. If you are unsure which battery fits your scooter, contact our support team before ordering.

Choose the official SUNNIGOO N3MAX 48V 13Ah lithium Electric Scooter battery to experience superior safety and long battery life. Built for durability, its rugged structure is designed to withstand harsh riding conditions while maintaining optimal safety. Key Features 1. High Energy Capacity: With a 13Ah capacity (624Wh), the battery is designed to provide extended operating time between charges, depending on the connected device and operating conditions. 2. Stable 48V Power Output: The 48V DC nominal voltage makes the battery suitable for equipment designed to operate on a 48V power system, delivering consistent electrical performance. 3. 25A Continuous Output: The battery supports a 25A current output, allowing it to power devices that require moderate to high current while maintaining stable operation within its specifications. 4. Compact, Space-Efficient Design: Measuring 415 × 107 × 45 mm, the battery features a slim profile that can simplify installation in compatible equipment with limited battery compartment space. The specific details are as follows: Parameter Specification Product Name Rechargeable lithium battery pack Model YC10-13S4Y-DC26-CLY Capacity 13Ah (624Wh) Voltage DC 48V Current 25A Outline Dimensions 415 (L) x 107 (W) x 45 (H) mm