SUNNIGOO | Premium Electric Scooter Accessories & Parts

Compatible Models

This 350W brushless hub motor is an original replacement part for the SUNNIGOO N7PRO 350W Foldable Electric Scooter. It matches the motor that shipped with your N7PRO in both power rating and mounting geometry, so it restores the original 25 km/h top speed and smooth acceleration without adapters or firmware changes. → See the SUNNIGOO N7PRO scooter

Note: Please specify the tire type and scooter serial number when placing your order.

Why replace your N7PRO motor? Hub motors can lose torque, overheat on hills or develop bearing noise after thousands of kilometres. A fresh 350W brushless motor returns the N7PRO to its original performance: quiet acceleration, confident hill climbing and the 25 km/h road-legal top speed you bought it for. If your scooter still powers on but feels sluggish or makes mechanical noise under load, the motor is often the root cause.

Key Specifications

• Rated power: 350W brushless hub motor
• Voltage: 36V DC
• Motor type: Brushless DC hub motor with integrated hall sensors
• Compatibility: SUNNIGOO N7PRO only
• Contents: Hub motor with pre-fitted cable and connector
• Warranty: 1 year (replacement part)
• Delivery: EU warehouse · 3–5 working days

Before Ordering

Motors are classed as a precision spare part. After placing your order, please contact our online customer service with your vehicle serial number or original order number so we can confirm the correct batch before dispatch. The serial number is located on the side or underside of the scooter deck.

Installation

Replacement should be carried out by a competent technician. The front wheel motor swaps into the original fork mounts and connects to the existing controller plug; no soldering is required if the original connector is intact. Re-calibrate the scooter through the SUNNIGOO app after installation to ensure accurate speed and battery readings. If you are not comfortable opening the deck or removing the wheel, contact a local e-scooter repair centre or our support team.

Disclaimer: The accessories sold by this store are exclusively compatible with SUNNIGOO branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Other N7PRO spare parts: N7PRO Battery 36V 10.4Ah · N7PRO Charger 42V 1.5A — every wearing part for the N7PRO ships from our EU warehouse, and our support team answers at service@sunnigoo.com.

———Note! After placing an order, please get in touch with online customer service and provide the vehicle serial number or order number. The batch number must be confirmed before shipment! Otherwise, it cannot be shipped. Serial number location: 1. Side of the pedal 2. Bottom of the pedal

High-performance brushless motor specifically designed for SUNNIGOO N3LMAX electric scooter models. Engineered for optimal power delivery, this replacement motor ensures consistent acceleration and reliable operation across various terrains. Built with precision components to maintain the scooter's original performance specifications while providing enhanced durability for extended service life.

Disclaimer: These accessories are exclusively compatible with SUNNIGOO-branded scooters. Use with non-certified models may pose safety hazards and void the original manufacturer's warranty. Verify batch-number compatibility before purchase.

Compatible Models

This shock absorber and spring set is engineered as an OEM replacement for the SUNNIGOO X7PRO and SUNNIGOO X7 electric scooters. It is not compatible with other brands or models. If you own a different SUNNIGOO model, check the spare-parts section for your specific scooter.

Product Overview

The SUNNIGOO X7 / X7PRO Shock Absorbers & Springs are factory-spec replacements designed to restore the original damping performance of your scooter's front or rear suspension. Each unit is built from high-tensile spring steel with a corrosion-resistant coating, matched to the 27 kg sprung weight of the X7PRO frame.

Over time, stock springs lose tension and oil seals degrade — you will notice increased vibration on cobblestones, longer braking distances, and frame fatigue. Replacing the shock absorber returns ride comfort to factory levels and reduces stress on the deck welds and stem hinge.

What's Included

1 × shock absorber / spring unit (single piece; order two if replacing both front and rear). Mounting hardware is not included — reuse the original bolts or source M8×25 mm stainless bolts with Nylock nuts.

Installation Note

Remove the wheel, detach the lower mounting bolt, compress the old spring with a strut compressor or cable ties, and slide the unit out. Install the replacement in reverse order. Torque the mounting bolts to 25 N·m. If you are unsure about suspension work, have the part fitted by a qualified bicycle or e-scooter mechanic.

Need the matching brake pads, tyres or controller? Browse the full X7PRO spare-parts collection or contact service@sunnigoo.com with your scooter's batch number for compatibility confirmation.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Precision-engineered SUNNIGOO Electric Scooter Accelerator delivers responsive throttle control for optimal riding performance. Designed with durable components to withstand frequent use, this replacement part ensures smooth acceleration and precise speed management. Compatible with multiple SUNNIGOO scooter models for seamless integration and reliable operation.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase.

Compatible Models

This NFC unlock card is engineered for seamless compatibility with the following SUNNIGOO electric scooters:

• SUNNIGOO N3LMAX — 800W off-road scooter with seat
• SUNNIGOO X7PRO — 3600W dual-motor off-road scooter
• SUNNIGOO X10 — 6000W peak dual-motor off-road scooter

Need a complete scooter instead of a replacement card? Click any model above to view specs, range and current stock.

Disclaimer: The accessories sold by this store are exclusively compatible with Sunnigoo branded scooters (identifiable by the marked batch number located beneath the footrest or on its side panel). Use with non-certified models may pose safety hazards and will automatically void the original manufacturer's warranty. Always verify batch number compatibility before purchase. Engineered for seamless compatibility with SUNNIGOO N3LMAX, X7PRO, and X10 models, this specialized NFC Unlock Card provides instant access authentication. The card utilizes advanced near-field communication technology to deliver reliable, secure unlocking capabilities without additional configuration. Essential for system administrators and users requiring efficient access management.